The panels, by virtue of being water-based, They are already free of
HFCs are therefore ahead of their time and these are the next generation,
The panels are free of formaldehyde and asbestos,
These products are ODP-free
And their GWP is one
FANNI . TECH
Pre-insulated air ducts
We are one of the leaders in pre-insulated duct systems in the region.
Our panel manufacturing facilities are equipped with state-of-the-art equipment including the latest CNC machine for manufacturing insulated ductwork to ensure the highest quality
Specifications and benefits of pre-insulated duct
Cleanliness and air quality
There is no passage of particles due to the inner aluminum surface
Improving air quality because the aluminum surface prevents bacteria and fungi
Air smuggling
The invisible flange system ensures a low level of air leakage compared to traditional ducts
Eliminate and reduce longitudinal leaks at the transverse intersection
Superior thermal insulation
High thermal insulation, closed cell construction and superior thermal transfer coefficient of A0.021 W/(m0c)
firefighting
Self-extinguishing properties
Low fire performance
Not a burning drop
Detailing and assembly
The possibility of detailing and assembling the duct in the workshop or site
Ease of transportation
Installation
Lightweight, easy to install and reduces weight on buildings
Less work time, less cost in installation and materials used
environmentally friendly
It does not produce CFC, which makes the duct environmentally friendly and qualifies for the green building concept
economic
Low thermal values and reduced air leakage, which leads to
Save energy and reduce operating cost
Very competitive compared to traditional ducts
Types of pre-insulated duct panels
Uses of air-conditioned places
EZ–12AP21 panels for air-conditioned places
Panel size: 4000×1200 mm
Board thickness 20.5 mm
The thickness of the internal and external aluminum is 80/80 mm
Aluminum surface - embossed
EZ-12ASP21 panels for air-conditioned places
Panel size: 4000×1200 mm
Board thickness 20.5 mm
The thickness of the internal and external aluminum is 80/80 mm
Aluminum surface--embossed/brushed
Uses of non-air-conditioned places
EZ-12AR31 panels for non-air conditioned places
Panel size: 4000×1200 mm
Board thickness 30 mm
The thickness of the internal and external aluminum is 80/80 mm
Aluminum surface--embossed/embossed
EZ-12AS21 panels for non-air conditioned places
Board thickness 20.5 mm
Panel size: 4000×1200 mm
The thickness of the internal and external aluminum is 80/200 mm
Aluminum surface--embossed/embossed
Certification Available
Antifungal Certified
Dubai Central Laboratory Approved
MSC 67 (61)
UL - 723 (ASTM E84)
UL Greenguard
Dubai Civil Defence
British Standard 476 part 6
British Standard 476 part 7
NES 713 toxicity index
Third Party supervision ‘Certifi er’CF 777)
CFC / HCFC free
Accessories for connecting pre-insulated ducts
EZ-FI03L0 - Invisible flange joint aluminum 30 mm
This special alumiunium fl ange
permits 30 mm th. ducts to be joined
with extremely low leakage. The bars are
supplied in 4 meter lengths.
EZ-F102LO - Invisible flange joint aluminum 20 mm
This special alumiunium fl ange
permits 20 mm th. ducts to be joined
with extremely low leakage. The bars are
supplied in 4 meter lengths.
EZ-FT02LO / EZ-FT03LO - Tee connector flange joint 20/30 mm
This fl ange permits the
fl anging of one duct into the side of
another take-offs as tap-in or plenum
chamber. The bars are supplied in 4
meter length.
EZ-FI12L0 - Invisible flange joint polymer 20 mm
This special alumiunium fl ange
permits 20 mm th. ducts to be joined
with extremely low leakage. The bars are
supplied in 4 meter lengths.
EZ-AP92LO / EZ-AP93LO - Covering angle 20/30 mm
Grey polymer covering angle.
EZ-FHOOLO - H polymer bayonet
Built in shock-resistant polymer, this
piece permits “invisible fl anges” to be
connected. Supplied in 4 meter rods.
EZ-FU02LO / EZ-FU03LO18 - “U” Section bar in aluminium 20/30 mm
Used for fastening of anti-vibration joints,
grills and volume control dampers.
Supplied in 4 meter rods
EZ-AZ92LO / EZ-AZ93L0 - Zinc-coated steel angle bracket 20/30 mm
1.5 mm thick zinc-coated steel angle
bracket.
Connecting the AHU to air handling and grills
EZ-FC02L0 / EZ-FC03L0 - Chair section bar in aluminium - 20/30 mm
Used to fasten ducts to air handling
units and in the assembly of linear
diffusers. This section bar is supplied in
4 meter rods
EZ-FF02LO / EZ-FF3L0 - " F" section bar in aluminium - 20/30 mm
Permits all accessories with fastening
frames higher than 20 mm to be
fastened to the ducts. Supplied in 4
meter rods
Strengthening
EZ-AD90L0 - Aluminium shaped disk
Aluminium disk to distribute the
pressure created at the centre over a
wider surface to prevent damage to
the panel. Disk diameter 100mm, hole
diameter 10 mm
EZ-FR00L0 - Reinforcement section bar in aluminium
Special high stiffness aluminium alloy
reinforcement section bar.
Bars are supplied in 4 meters rods
VCD (Volume Control Damper)
Aluminium disk to distribute the
pressure created at the centre over a
wider surface to prevent damage to
the panel. Disk diameter 100mm, hole
diameter 10 mm
EZ-ASC230 Self threading screws
Special high stiffness aluminium alloy
reinforcement section bar.
Bars are supplied in 4 meters rods
Glue, tape and silicone
EZ-AT89L0 / 90LO - Easy aluminum tape
Self-adhesive aluminium tape to use in
the construction of the ducts.
EZ-AG 90L0 - Paint glue 15 kg
Special glue formulated to obtain perfect
adhesion on easy panels foam. The
product is supplied ready-to-use. Diluition
is possibile with special solven
EZ-AG85L0 - Profi les glue
Medium-viscosity adhesive for the gluing
of aluminium and Polymer section bars.
500 gr pack.
EZ-AS90L0 - Duct sealant
Single component silicone sealant.
280 cc stick